Novelties and products

We grant you an opportunity off additional product placement via the Exhibition website.

We help you to focus more of visitors’ attention on your products that enter the market, the advantages of new technologies and innovations!

Khimia 2019 novelties

The turnkey EKATO-photoreactor

Country of origin: Germany
Category: Equipment for the chemical industry

The stirred photoreactor from EKATO allows syntheses by the energy of light and an advanced stirring technique which ensures high circulation rates in the reactor. The concept of this new stirred reactor is ideal for multiphase reactions involving liquids, gases and solids. It combines high productivity and flexibility with the safe operation of immersed light sources. Reactors up to 50 m³ are realized with this proven design and a safe scale-up by our specialists enables further reactor sizes.

EKATO (Booth No. 21E40)
See more on:
Hydrogenation plants

Country of origin: Germany
Category: Equipment for the chemical industry

In our Hydrogenation Test Center we can examine and optimize your hydrogenation process with original raw materials under real operating conditions in pilot scale. The aim is to produce reliable test results for scale-up and development of a production process in an economical and timely fashion.

Our engineering teams will apply the obtained knowledge for design of a full-scale hydrogenation plant which is tailored to your specific process requirements. Thus we pave the way for an efficient and risk mitigated investment in the new construction or the rebuilt of a hydrogenation plant

EKATO (Booth No. 21E40)
See more on:
Renewable fluids Biolife

Country of origin: France
Category: Renewable solvents, viscosity reducers, plasticizers

Embracing the need for more sustainable, biodegradable fluids, industry calls for a new generation of high-performance solutions.

With its unique technology, TOTAL Special Fluids has developed a wide range of renewable hydrocarbons: BioLife. These products are obtained from 100% certified vegetable origin feedstock. Thanks to their outstanding performances, BioLife products provide sustainable solutions for many industries, ranging from Oil&Gas (drilling), polymers, inks and lubricants to cosmetic emollients and home care products.

Renewable isoalkanes from the Total Special Fluids offer a sustainable, safe and odorless alternative to traditional mineral oils

  • Colorless and odorless;
  • Low pour point down to -80°C;
  • High flash point up to 150°C;
  • Ultra low aromatic content;
  • Classified readily biodegradable.

BioLife range gives customers an opportunity to significantly reduce their environmental impact with no compromise on performance or availability.

TOTAL VOSTOK (Booth No. 23E55)
See more on:,
Glyceryl monostearate (beads)

Country of origin: Russia
Category: Additive for PVC compounds

Since September, this product has been available in the form of beads with good flowability, as they have a low internal friction and a high bulk density.

JSC "Vyazemsky Plant of Synthetic Products" (Booth No. 21F34)
See more on:
Multigon silos from Geroldinger

Country of origin: Austria
Category: Discharging, storing, dosing, transporting systems for bulk solids

Multigon silos due to their design with flexible internal walls effectively prevent the adhesion of materials to the inner walls. The octagonal cross-section of the Multigon silo cells in combination with the smooth transition to the chute (without blanking zone) and the Oszillomat discharge system allows the silo’s contents to be continuously maintained in an active state, thus providing a mass flow. This technology is ideal for cases where it is not possible to use hoppers with a discharge chute, as well as for rectangular and square discharge systems. Multigon silos are installed inside and outside the workshop, providing safe storage of hygroscopic, thermo- and moisture-sensitive bulk solids.

Geroldinger (Booth No. 21E30)
See more on:
Laboratory air-jet lab sieve KLS from GKM Siebtechnick

Country of origin: Germany
Category: Screen and vibrating screener

The unit is connected to a standard vacuum cleaner in which the screened materials are subsequently retained. A small quantity of the product to be analyzed is applied to the screen and weighed exactly. Then the screen is sealed airtight with an acrylic glass cover. The screening process begins right after the relatively short screening time of 3-5 minutes has been set and the start button has been pushed.

The rotating air-jet nozzle mixes up the product and blows the sieve bottom-up at the same time. The negative pressure produced by the vacuum cleaner draws the fine particles through the mesh holes down into the filter bag of the vacuum cleaner. The integrated 3-way valve always provides a quick and precise adjustment of the negative pressure. The unit stops automatically after the pre-set time has been reached. The weight of the sieve residue on the screen is then measured.

Major advantages:

  • Extremely high screening efficiency and reproducible results;
  • Short screening times;
  • Suitable for all standard 200 mm laboratory screens;
  • Favorable price and short delivery times.
GKM Siebtechnick (Booth No. 21E30)
See more on:
Roller presses for cold and hot briquetting from Köppern

Country of origin: Germany
Category: Roller presses and plants for cold and hot briquetting

For cold briquetting of material with temperatures of up to 100°C / 212°F it may be necessary to add binders to improve the briquette forming characteristics. Typical briquette sizes range between 1.5 and 250 ccm. As a result of the symmetrical pockets machined into the surfaces of the rollers, briquette machine production yields very uniform briquettes. Binders are primarily used for the briquetting of substances that have an inadequate adhesive power and are unable to produce a firm briquette.

In this manner, coal dust has been converted into oval shapes used as domestic fuel for more than 100 years now. Material to be briquetted without additive binders is fed between two counter-rotating profiled rollers via suitable feeding equipment.

The feedstock is drawn into the briquetter and pressed through the gap between the rollers. As a result of its void volume being reduced, the bulk materials apparent density will be compacted by factor of 1.5 - 3.


  • Ashes
  • Burnt lime
  • Chrome ore
  • Copper concentrate
  • DMT
  • Dried sewage sludge
  • FGD gypsum
  • Filter dusts
  • Iron oxide
  • Magnesite
  • Magnesium oxide
  • Metal chips and turnings
  • Mill scale
  • Salt
  • Sodium cyanide
  • Sponge iron
  • Steelwork dusts
Köppern (Booth No. 21E30)
See more on:
Cheat sheet for preparative chromatography

Country of origin: Switzerland (BUCHI)
Category: Chromatography

BUCHI Labortechnik AG (Switzerland), partner of Analit Products, developed a unique cheat sheet with key principles fro flash and preparative chromatography.

Cheat sheet:

  • Contains key principles for separation and detailed overview of method development for flash and preparative chromatography;
  • Reminds about main parameters for resolution improvement;
  • Explains how to choose and handle cartridges and columns for preparative chromatography.

Learn more information here >>

Analit Products (Booth No. 81C42)
See more on:
Blog for chromatography fans!

Country of origin: Switzerland (BUCHI)
Category: Chromatography

BUCHI Labortechnik AG (Switzerland), partner of Analit Products, launched the chromatography blog in Russian. You will find tons of helpful and good content there! Read Barts’ Blog about chromatography and get inspired by BUCHI!

*Blog is also available in English

Read the blog here >>

Analit Products (Booth No. 81C42)
See more on:
Hammer mill HM10/12-18, CPC GmbH

Country of origin: Germany
Category: Mills, Crushers

CPC’s Hammer mills are effectively used in the coal, mineral and other industries for the grinding of different materials. They ensure efficient milling of such materials as coal, halite, dolomite, limestone, gypsum, etc

The CPC main advantage is you get the high German quality for the comparably low price to other European manufactures. Also, this type of the mills has extremely long lifetime and low energy consumption. Using the operator panel, you can control crusher properties such as bearing temperature and vibration, speed, lubrication and more.

All mills and crushers are fully manufactured and assembled in Germany, and tests are also carried out in our test center.

We produce the highest quality equipment that meets your established requirements and specifications.

CPC Crushing Processing GmbH (Booth No. 21E30)
See more on:
Container Mixer Multitool (MT), MIXACO

Country of origin: Germany
Category: Mixers

Container Mixer MIXACO consists of a mobile container and the actual mixer.

The container serves as transport container, as mixing container during mixing and as reservoir container for the further processing.

The container filled with raw materials is connected with the mixing head of the mixer and turned through 180° into the mixing position.

After mixing has been completed and the mixer has been turned back into its basic position, the mixed product in the container is transported on for the further processing.

In the cleaning position, the mixer can be cleaned quickly and without any residues being left.

Comparing with usual technologies, the use of Multitool decreases tenfold the heating of the material: mixing components are heated only to 0.5-1° C per minute. This became possible due to the special arrangement of the mixing instruments.


  • Minimal product heating;
  • No fusion or adhesion of material;
  • Adjustable comminution rate;
  • No agglomeration of material;
  • Less drive power;
  • Improved energy efficiency.


  • Powder coatings premixes;
  • Powder coatings with low melting temperature;
  • Master batches (PE, PP, PA, PVC, PS, ABS, TPE, EPS …);
  • Additives;
  • PTFE;
  • Cosmetics.
MIXACO (Booth No. 21E30)
See more on:
Guide Ring Classifier GRC, NEUMAN & ESSER

Country of origin: Germany
Category: Classifiers

Air classifiers NEUMAN & ESSER are effectively used in the chemical, mineral and other industries for the production of fine powders. They ensure efficient separation of fines from the total flow of material.

The initial layout of the NEUMAN & ESSER air classifier GRC (Guide Ring Classifier) was designed for the classification of roughly 200 μm to 20 μm particles. Depending on the classifier size, throughputs of several tons per hour for medium fineness are possible. For classification in the higher fineness range, throughput is reduced to several hundred kilograms per hour because the number of particles to classify increases exponentially.

In order to improve the already existing high performance, NEUMAN & ESSER has now made several improvements to the GRC air classifier. The experts focused on how to dispersing fine and coarse in the feed material and on efficiently guiding the material through the GRC classification process.

The new GRC design features now a distribution cone in the inlet of the feed material above a significantly redesigned dispersing unit. After sliding down the cone and passing the dispersion zone, the material reaches the known ring gap. In contrast to the former design now, a virtuously engineered guide vane ring handles the transportation into the direction of the classification zone.

Extensive and detailed testing revealed an unexpected magnitude of improvements not only in yield, throughput and energy consumption but also in the range of achievable fineness, as the company told. The new design now allows widening the possible fineness range from 200 μm to 2 μm.

NEUMAN & ESSER Process Technology (Booth No. 21E30)
See more on:
Turbofiner, PLM type from Pallmann

Country of origin: Germany
Category: Mills and grinding plants

The Turbofiner is a size reduction machine for the production of finest powder qualities from soft to medium-hard materials. The principle of the machine is based on the size reduction of the material in a high turbulent airflow by micro-finest whirls.


  • Elastomers and plastics;
  • Vegetable products;
  • Cellulose and its derivatives;
  • Soft minerals;
  • Pigments, resins, salts;
  • Composite and recycling materials.

Decisive advantages:

  • Gentle fine and finest grinding;
  • High throughput capacity;
  • Grinding and drying in one step;
  • Easy to clean;
  • Wide variety of applications;
  • Good access to grinding chamber;
  • Bearing is separated from the grinding chamber;
  • Easy exchange of wear parts.
Pallmann (Booth No. 21E30)
See more on: